This folder is not included when compiling ![]() clockfaces: contains the collection of available clockfaces.The Clockwise structure consists mainly of three folders There is a link there where you can read the current value of LDR and test if it's working.Ĭlockwise uses PlatformIO as IDE, so the configuration is already done if you use the same. ![]() LDR Pin: The ESP32 GPIO pin where the LDR is connected to.You can use one of the NTP Pool Project pools or a local one. NTP Server: Configure your prefered NTP Server.Automatic Bright: Once you connect a LDR in the ESP32, Clockwise will be able to control the display bright based on the ambient light.Use 24h format: You can choose between 20:00 or 8:00PM in your device.Display Bright: Change the display bright.You can use this options to change the order. Swap Blue/Green pins: Some displays have the RGB order different, in this case RBG.NTP Server: By default the clock will sync with, but you can configure your own (local) NTP server to be used.so that the clock can connect to an NTP server to get the correct time. Timezone: The timezone must be in the format America/New_York, America/Sao_Paulo, Europe/Paris, Asia/Dubai, etc.The settings page have the following options Remember: it is important to use a 2.4GHz WiFi, it will not work on 5GHz. But in case you change your access point or password, you can set up just the WiFi connecting the Clockwise on USB, opening and clicking in Flash button, a window will pop up with a few options where you can re-configure your WiFi network ( screenshot) as well as open the Settings page to change preferences using button VISIT DEVICE. ![]()
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |